Published Written and reviewed by 秋和PC
Learning from Parts-Buying Mistakes: Compatibility Checks Before You Buy
Wrong fan size, mixing up DDR4 and DDR5, a graphics card that won't fit, a motherboard missing headers. Based on real mistakes we've seen on assembly and repair jobs, here is what to check before buying parts.
Many customers choose and buy their own parts, but sometimes it only becomes clear on assembly day that a part can't be used. That means buying something extra or booking another visit, and the build is delayed by days.
Here are the points worth checking before you buy, based on real mistakes from our assembly and repair jobs.
1. Buying the wrong case fan size
Case fans mostly come in 120mm and 140mm, with smaller sizes such as 92mm too. One customer had bought 92mm fans that couldn't be mounted in the case, so work had to stop for the day.
- Check the case specs for supported fan sizes and positions
- If unsure, choose 120mm fans with a 25mm thickness ("12025"), which most cases support
2. DDR4 and DDR5 memory are not interchangeable
DDR4 and DDR5 modules have the notch in different places, so they physically won't fit in a board that doesn't support them.
- A motherboard with "D4" or "DDR4" in its name supports DDR4
- Speed is a rough guide: DDR4 is typically 2133–3600MHz, while DDR5 is mostly 4800MHz and up
- Always check the motherboard's spec sheet for supported memory before buying
3. The graphics card doesn't fit in the case
High-end graphics cards can be longer than 35cm and three or more slots thick. We saw a card about 355.5mm long and three slots thick that wouldn't fit, so the customer used the PC with a panel removed for a while and eventually replaced the whole case. Even in the larger new case, one fan had to come out before the card would go in.
- Check the case's maximum graphics card length, including what's left after front fans or a radiator
- Also check the thickness (number of slots) and space for the power cables
4. The motherboard is missing headers
Budget motherboards sometimes leave out certain headers. In one case, the motherboard had no header for the case's front Type-C port and no ARGB header, so neither the case nor the liquid cooler lighting could be used.
Headers to check so you can use all your case and cooler features
- A header for the front Type-C port (USB 3.2 Gen 2 Type-C header)
- The number of 5V 3-pin ARGB headers
- The number of fan headers (prepare a fan hub if there aren't enough)
5. The lights stay on after shutdown
One customer reported that the motherboard and memory kept glowing after shutting down. This isn't a fault; it's a setting that keeps standby power on while the PC is off.
On a GIGABYTE motherboard, enabling ErP in the BIOS (UEFI) stopped the lights after shutdown. The option name differs between brands, so look for settings such as "ErP", "Deep Sleep" or power saving.
6. Buy the same model when replacing a laptop screen
When replacing a laptop screen, you need a part with the same resolution, refresh rate and connector as the original. We saw a laptop that originally had a 1920×1080, 360Hz panel fitted with a higher-resolution 4K panel; the picture was garbled, and the original screen had to go back in.
Even if the size looks the same, a different panel model may not display at all. The safest approach is to check the original panel's model number before buying.
7. Before wiping a manufacturer's PC yourself
One customer used a third-party tool to wipe the drive of a manufacturer's all-in-one PC before reinstalling, and the system could no longer be written to it, so it couldn't be recovered.
- For manufacturer PCs, check the maker's recovery feature or official procedure first
- Before wiping a drive, make sure you have a way to restore it
Want your parts list checked before buying?
If you're unsure about a combination of parts, send us your parts list before buying and we can check for size or header problems in advance. Feel free to ask so assembly day goes smoothly.
Related service cases
- Desktop power supply, CPU, and GPU upgrade in TokyoA same-day power supply, CPU, and graphics card upgrade for a desktop PC.
- Lian Li panoramic build with screen and lighting setup in MizonokuchiAn on-site Lian Li panoramic build in Mizonokuchi, Kawasaki, including setup of multiple screens and lighting.
- White HYTE PC that would not power on in ShibuyaA white HYTE PC in Shibuya that seemed not to power on started normally once the steps were confirmed, followed by initial system setup.