Published Written and reviewed by 秋和PC
Before Adding an SSD or HDD: Standards, Slots and Setup After Installation
When adding storage to a PC that's running out of space: the difference between M.2 and SATA, motherboard slot limitations, initializing a drive that doesn't show up, and how to replace your boot drive.
Games keep getting bigger, and we often hear from people who have run out of storage. On repair visits, we frequently add a drive while we're cleaning a PC or replacing fans.
Adding a drive isn't difficult, but if you don't know the standards and slot limitations, you can end up with a drive that won't fit or doesn't show up once it's installed.
1. Types of storage
| Type | Characteristics | Main use |
|---|---|---|
| M.2 NVMe SSD | Fast; plugs straight into the motherboard | Windows, games |
| 2.5-inch SATA SSD | Slower than NVMe but much faster than an HDD | Games, data |
| 3.5-inch HDD | Slow, but cheap per gigabyte | Storing photos, video, etc. |
M.2 NVMe SSDs come in generations such as PCIe Gen3, Gen4 and Gen5. A newer SSD will work in an older slot, but its speed is limited to what the slot supports.
2. Check the motherboard's slots
Is there a free M.2 slot?
Check your motherboard manual for the number of M.2 slots and what each one supports (NVMe only, SATA only, or both).
Watch out for shared slots
On some motherboards, using a particular M.2 slot disables some SATA ports, or reduces the speed of the graphics card slot. This is because they share the same lanes on the board. The "M.2" or "Storage" section of the manual lists which slots and ports are shared.
Laptops
Many laptops have no free M.2 slot. Even when there is one, drives come in different lengths such as 2230, 2242 and 2280, so check which size is supported.
3. Installation tips
- Shut down the PC and unplug the power cord before you start
- If the motherboard has a heatsink for the M.2 SSD, use it, and remember to peel the protective film off the thermal pad
- Gen5 SSDs run hot, so pay particular attention to the heatsink and airflow in the case
- SATA SSDs and HDDs need a SATA power cable from the power supply as well as a data cable
When fitting several drives, planning the cable routing first gives a much tidier result. For a white ROG build we assembled in Ichikawa (Motoyawata), we planned the placement and cabling before starting, to fit three drives: a Samsung 9100 PRO, a 990 PRO and a WD Blue.
4. If the drive doesn't show up
A brand-new drive won't appear in File Explorer just because it's installed.
- Right-click the Start button and open "Disk Management"
- When the "Initialize Disk" window appears, choose "GPT" as the partition style
- Right-click the "Unallocated" space and create a "New Simple Volume"
If the drive doesn't appear in Disk Management either, check whether the BIOS detects it. If the BIOS can't see it, the cause may be a poor connection, the slot being disabled by sharing, or a faulty drive.
5. Moving to a larger boot drive
There are two ways to replace the drive that Windows is installed on with a larger one:
- Cloning: copy everything from the current drive to the new one, for example with the migration software provided by the SSD maker. Your apps and settings carry over as they are
- Clean install: install Windows fresh on the new drive. The system will feel lighter, but you'll need to reinstall your apps
Either way, back up important data first, and if BitLocker is on, have your recovery key at hand. For details, see preparing to reinstall Windows and our BitLocker recovery key guide.
What helps if you know it in advance
- The motherboard (or laptop) model
- The type and capacity of your current storage
- The type, capacity and purpose of the drive you want to add
With the model number, we can check free slots and sharing limitations in advance and recommend a suitable drive.
References
External pages may change; check the official sites for the latest information.
Related service cases
- Desktop fan-noise check and storage upgrade in OsakiAn on-site check of desktop fan noise in Osaki, fixed by cleaning, plus an extra storage drive.
- On-site white ROG Hyperion build in Motoyawata, IchikawaAn on-site all-white high-end build around an ROG Hyperion White Edition case in Motoyawata, Ichikawa.
- Cable management and fan replacement for a black ASUS PC in HasuneRe-cabling a customer's self-built black ASUS PC in Hasune, with a fan replacement and an added drive.