Published Written and reviewed by 秋和PC

Common Pitfalls When Building a PC from Your Own Parts

Fan connection types, Bluetooth keyboards, case and cooler sizes, reusing PSU cables, and moving or leaving Japan. What to check before assembly day so the build can be finished.

More and more customers buy their own parts and ask us only to assemble them. Most builds go smoothly, but sometimes an incompatible combination or a missing accessory means the build can't be finished on the day.

Based on problems we have run into on real assembly jobs, here is what to check before buying parts and before booking.

1. Check how the fans and lighting connect

Some recent ARGB fans can only be connected through a dedicated hub (controller), and the hub may only be included in the three-pack.

One customer had bought five single-pack fans, so there was no hub and the fans could not be connected directly to the motherboard. We installed three fans and prepared the wiring, and the customer connected them after buying the hub separately.

Check before buying

  • How the fans connect (directly to the motherboard, or through a dedicated hub)
  • Whether the hub comes with single packs or only with sets
  • Whether the motherboard has enough fan and ARGB headers

2. Initial setup needs a wired (or receiver) keyboard and mouse

Right after assembly, you install the OS and adjust BIOS settings. At this stage Bluetooth devices do not work yet, because Bluetooth needs the OS and its drivers installed first.

We have had a customer who only had a Bluetooth keyboard and mouse, so setup could not continue. Please prepare one keyboard and mouse that connect by USB cable or through a USB receiver.

3. Case, cooler and graphics card sizes

  • Liquid cooling radiators: large radiators such as 420mm only fit certain cases. Check the supported sizes and mounting positions in the case specs.
  • Air cooler height: make sure it is within the case's CPU cooler height limit.
  • Graphics card length: a front-mounted radiator or fans reduce the maximum card length.

Cases with lots of glass and showcase-style cases have many parts and long cables. Planning the installation order and cable routes before you start makes for a much cleaner build.

4. PSU capacity and cables

  • High-end graphics cards draw a lot of power, so check the PSU wattage and connectors (12V-2x6 / 12VHPWR, etc.).
  • When replacing a PSU, do not reuse the old unit's modular cables. Pin layouts can differ between brands and models, and mixing them can destroy components.
  • Cases differ in PSU space and in room for routing cables behind the motherboard tray.

5. If you plan to move or leave Japan

  • Keep the boxes for your parts. Packing and shipping become much easier, and parts with boxes are easier to resell.
  • When leaving Japan, many people take only the core parts (CPU, motherboard, memory, storage, graphics card) and sell heavy parts like the case and PSU locally.
  • We also reassemble PCs that customers took apart overseas and brought to Japan. To avoid damage in transit, always remove the graphics card and CPU cooler and pack them separately.
  • Parts bought overseas may not be covered by the manufacturer's warranty in Japan.

6. What to prepare before booking

  • All parts and accessories (screws, cables, manuals, hubs)
  • A wired or receiver keyboard and mouse
  • A monitor and video cable
  • A Windows license (if you want the OS installed)
  • A parts list (with model numbers we can check compatibility and sizes in advance)

If you send us your parts list beforehand, we can spot missing parts and size problems before assembly. To avoid "we couldn't finish because a part was missing" on the day, feel free to ask us first.

Need a similar service?
Every device and symptom is different. Send us the model, symptoms, and preferred service method so we can confirm a practical approach first.